Zero H2O^® is a non-wax, organic-plant-based soap/surfactant/water-based polymer formula that can be used on everything except tires. Made from coconuts, this organic soap will dissolve much of the harmful dirt on contact, while the polymers help protect from scratching. No wax means no smearing on windows and no white residue on rubber. This product is super easy to use and can be used on your car, dry or wet.

Simple to Follow Directions: 
Spray On. Rub In. Wipe Off!

1. Shake the bottle of Zero H2O^® DriWash & Shine before using. While our formulas don’t settle, shaking ensures all the ingredients are fully dispersed for the best possible results.

2. Spray some product onto a folded microfiber towel.

3. Then spray some onto the area you want to clean, holding the bottle 10 to 15 inches away from the surface. Spray only on large, flat areas. Do not spray directly into cracks or seems.

4. Gently rub Zero H2O^® DriWash onto the surface with the first towel. (Always remember to use the ‘wet on wet”’ method.” This ensures nothing dry ever touches anything else dry.)

TIP: You’ll need to be very conscious of the surfaces you’re cleaning. If you clean bird droppings, a muddy area or anything else that could be gritty or heavily soiled, remember to remove any coarse material, fold the towel to a clean section or replace the towel with a clean one. If the towel becomes too soiled from grime on the surface, don’t keep using it to rub Zero H2O^® DriWash. Use common sense to make the most of this product.

5. After initially applying Zero H2O^® DriWash, you’ll see a light haze appear. Acting quickly, before it dries, switch to another clean microfiber towel and buff the haze into a brilliant shine. That's it!

6. Repeat steps 1 to 5 as you move along the rest of the car until the entire vehicle is clean. We recommend you start with the roof, cleaning at that level as you round the car. Continue working your way down and around the car until you finally reach the bottom rocker panel of the vehicle. Basically, it should work like this: 1) clean the roof in one round, 2) clean the windows all the way around in another, 3) clean the hood, middle of doors and fenders in one more round and 4) finish up with the bottom of the doors, fenders and bumpers. Finally, use a third clean towel and go around the car one last time as a final check against missing any spots.

The result? A beautiful and shiny vehicle that’s clean, polished and protected. Regular application of Zero H2O^® DriWash & Shine will help you maintain this luxurious shine.

For the average mid-size car, you’ll need only about 2 to 4 ounces for a complete cleaning. It might take a little more the first time, but after that, your car’s surface will be very smooth and slippery. That makes subsequent cleanings a lot easier, making it likely you’ll need to use less product.


Important Note:  : For a professional-looking detailing job and optimal results from the product, be sure to follow the application guidelines for Zero H2O^® DriWash. For example, the product should only be used on NON-porous surfaces. The water-based formula also goes on easier and works better in a shady area that’s out of the hot sun. Do not use if the surface is excessively soiled, muddy or has caked-on sand stuck to the paint. If you have any questions, please contact ecomart^® Customer Care at anytime.